Wonder Edge Standard

Install your edge in a fraction of time

  • Traditional sub-base installation

  • Planters

  • Tree Wells

  • Pet Areas

FAQ

Frequently Asked Questions

Using the nail spikes you have on hand for the turf, simply set the edge by hammering the nail spikes through the holes on the ground pads on the Wonder Edge. You only need to do this every 2-3 feet. Then, when you secure the turf edge, come back with nails every 3-4 inches.

Yes, you can install Wonder Edge Standard or LP by using an adhesive or epoxy to glue the edger down to the floor. If needed, concrete screws or nails can be used as well.

Yes, the Wonder Edge LP version qualifies for access under the ADA Act. Please click here for more information.

Wonder Edge Standard can reasonably achieve a 4 ft diameter circle, like a larger tree well. It is possible to get to a tighter radius but this should be done on a hot day or with a heat gun/blow dryer to generate more flexibility. Wondering Edge LP can achieve a 2 foot diameter and we would encourage using this version for tight radius situations like tree wells, etc.

There is an internal connector that is sold and shipped with each piece, that keep the units aligned smoothly.

Brown, Black and Green.

Please see our locations page. If there is no dealer present in your area, wed be happy to ship product direct.

Standard has a height of 7/8″ while LP has a 3/8″ height.  LP also has a 45 degree angle that helps to enhance accessibility and make it ADA compliant.

When you encounter a typical artificial turf installation and the turf edge is open or has a ‘soft edge’, like when terminating to a planter. Because of its height the Standard works like a small border wall to prevent plant material such as mulch, rock, and soil from collecting onto the turf.  The LP is commonly used when the need is: a lower edge, a glued down perimeter with no trip hazard, more flexibility, a tighter radius.

comparing 2 sizes synthetic turf accessories - edging products
Low Profile
  • 3/8" height
  • 45 degree angle to enhance accessibility for ADA compliance
Standard
  • 7/8" height